DANIEL DEFENSE M4 CARBINE, MK18 – FACTORY SBR FDE

$1,799.95

Daniel Defense Email For Xtreme Price

Call (832) 363-3783 for availability

Daniel Defense M4 CARBINE, MK18 – Factory SBR FDE(Short Barrel Rifle)

Description

Daniel Defense M4 CARBINE, MK18 – FACTORY SBR FDE 10.3 inch
Use what “THEY” use. The Daniel Defense M4 CARBINE, MK18 – FACTORY SBR FD features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3” Cold Hammer Forged Barrel. The Flat Dark Earth MK18 rail system features the Bolt-Up System™ has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units). The 10.3” barrel is the same length in use for the MK18 upper most commonly used for CQB operations. The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.
Daniel Defense M4 CARBINE, MK18 – FACTORY SBR NFA DISCLAIMER
>This firearm is a regulated item by the National Firearms Act (NFA). Please check with your local and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply with all NFA rules and applicable laws.
Daniel Defense M4 CARBINE, MK18 – FACTORY SBR MATERIALS & CONSTRUCTION

LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3″ Govt Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Sold Separately
HANDGUARD: Daniel Defense MK18 RIS II, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized (FDE or Black)
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
RAIL LADDERS: 3 low profile ladders made from Santoprene, heat resistant to 300° F.
Made in the USA!

Daniel Defense M4 CARBINE, MK18 – FACTORY SBR WARRANTY STATEMENT
All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your rail system in the most expeditious and inexpensive manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.
Daniel Defense M4 CARBINE, MK18 – FACTORY SBR ADDITIONAL INFORMATION
Manufacturing # / SKU 02-088-MK18

Restricted Shipping Yes
Caliber 5.56mm NATO
Gas System Carbine
Product Weight 5.88 lbs
Length 26 ¾” – 29 7/8”
Magazine Magpul PMAG 30-Round
Case Daniel Defense Full-Latch Impact Plastic Case
Manufacturer Daniel Defense

Have a Question? Submit it here!

*
*

*