MDT SRS Stock

Description

MDT SRS Skeleton Rifle Stock in Stock

The MDT SRS Stock (Skeleton Rifle Stock) is designed to provide the best in class strength and ergonomics, while affording adjustability and comfort. Created for fixed interface, along with MDT’s ESS and ACC (XTN) buttstock interfaces, tool less adjustments make this a perfect fit for every shooting position. Length of pull can be fine tuned with the thumbwheel and locked with thumb screws or set screws that are included. Up, down, left and right adjustments can be made to the buttpad to fit the shoulder pocket to any shooter. In addition, horizontal, vertical and cant adjustments to the cheek riser are simple. The SRS Skeleton Stock is available in seven models; SRS Standard (Fixed), SRS Short (Fixed), STS Lite (Fixed), SRS-X Standard, SRS-XF (Folding) Standard, SRS-X Elite and SRS-X Short, and eight Cerakote colors.

There are a few differences between the MDT SRS-X and SRS-X Elite buttstocks for XTN Interface (ESS and ACC). Added rear balance is provided on the SRS-X Elite with a steel buttpad. A second guide rod is provided for stability and etched guide rods are also featured. MDT’s SRS-XF, folding stock, gives the option to either bolt side, or non-bold side, and locks in full or folded position. A double hinge allows for the low profile without protruding hinge points. The thumb wheel for the SRS-XF stock is sold separately, as it interferes with folding the stock.

MDT SRS Skeleton Rifle Stock (Specifications):

• Machined from 6061-T6 Aircraft Grade Aluminum
• Skeletonized body provides robust structure
• Length of Pull: Adjusted with thumb wheels up or down and can be canted
• Cheek Rest: up or down, side to side adjustments
• Positions locked with thumb screws and set screws included
• Buttpad adjustments in or out
• Bolt cut out in cheek rest for easy bolt removal
• Attachment point on bottom surface, for 2.5 inch rail
• Two ambidextrous QD flush cup sling mounts

MDT SRS Skeleton Rifle Stock/Chassis Compatibility and Length of Pull:

SRS Standard (Fixed)

• TAC21 (15-16 inches)
• LSS (16.6-17.6 inches/requires carbine to fixed adapter)
• LSS-XL (13.5 to 14.5 inches)
• HS3 (13.5 to 14.5 inches)

SRS Standard Short (Fixed)

• TAC21 (14-15 inches)
• LSS (15.75-16.75 inches/requires carbine to fixed adapter)
• LSS-XL (12.5 to 13.5 inches)
• HS3 (12.5 to 13.5 inches)

SRS Lite (Fixed)

• Various MDT chassis systems using the fixed buttstock setup.

SRS-X Standard

• TAC21 (15-16 inches)
• LSS (16.6-17.6 inches/requires carbine to fixed adapter)
• LSS-XL (13.5 to 14.5 inches)
• HS3 (13.5 to 14.5 inches)

SRS-XF (Folding) Standard

• ESS (13.75 to 14.75 inches)
• ACC (13.75 to 14.75 inches)

SRS-X Elite

• ESS (13.5 to 14.5 inches)
• ACC (13.5 to 14.5 inches)

SRS-X Elite Short

• TAC21 (14-15 inches)
• LSS (15.75 to 16.75 inches)
• LSS-XL (12.5 -13.5 inches)
• HS-3 (12.5 -13.5 inches)

Shop MDT Chassis on Sale, on line 24/7. Call or text Xtreme Guns and Ammo at 832-363-3783 for answers to all of your MDT questions and needs.